- Plate heat exchangers have excellent heat exchange efficiency in the heating and cooling procedures of industrial processes.
- The minimum temperature difference between hot and cold can be 0.5°C.
- The number of plates can be increased or decreased as operating conditions change.
- Small size and light weight.
- Easy to maintain.
- Can transport fluids with high viscosity and high corrosiveness.
- Features
- Specification
- Applications
SRP Taiwan SWEP plate heat exchanger
Plate heat exchangerPlate heat exchangers are composed of baffles, plates, gaskets, tightening bolts, nuts and other parts. It breaks away from the drawbacks of traditional Shell and Tube Heat Exchangers, which have large floor space and low heat exchange efficiency. Its advantages are simple structure, small size and light weight. It is also the industrial heat exchanger with the highest heat transfer efficiency in the world. Using stainless steel plates and gaskets as the main body, the fluid flows through the channels patented pattern on the plates to form flow channels and achieves the purpose of hot and cold exchange while flowing. At the same time, the model can be selected according to the user's site and different working conditions. It is widely used in the industry today. The specifications range from 1/2" interface to 20" interface, which is suitable for chemical industry, air conditioning and refrigeration, maritime affairs, petroleum industry, machinery manufacturing, power plants, metallurgy and metal industry, food industry, etc.
Plate material: 304/316L/317/904/SMO254/Ti/Ti-pd/C276, etc.
Gasket material: NBR/EPDM/Viton/CR/PTFE, etc.
The double-layer heat exchanger plate is characterized by overlapping two traditional heat exchanger plates and combining four diagonal holes through laser welding to form a double-layer heat exchanger plate. When a penetrating leak occurs in one of the plates, this design can be detected from the outside in time, which can effectively reduce the industrial safety risks caused by the mixing of the two media. It is suitable for processes where mixing of two fluids is strictly prohibited, such as hospital water, pharmaceutical industry, food industry, chemicals, gunpowder and crude oil center cooling, etc. Almost all plate specifications of Taiwan's SWEP products can be produced as double-layer boards.
Semi-welded plates are mainly used in ammonia system, refrigerant systems and other fluids where general rubber gasket is not applicable. Through laser welding, two plates are welded into a closed flow channel to ensure the safety of the fluid in the flow channel. Usually suitable for refrigeration industry and chemical, pharmaceutical or other special industries.
Plates material: 304/316L/317/904/SMO254/Ti/C276
Gaskets material: CR or ETFE
| Plate heat exchanger | |
|---|---|
| Flow operating range | 10~4250m³/h |
| Maximum operating pressure | 2.5MPaG |
| Operating temperature | -20°C~180°C |
| Gasket material | EPDM / NBR / Viton / PTFE |
| Plate material | 304 / 316L / Ti / SMO254 / C276 |
